For Sale: 1966 Chevrolet Chevy II in Buckley, Washington for sale in Buckley, WA
Vehicle Description For Sale:
1966 Nova - LESS THAN 50 MILES SINCE GROUND UP RESTORATION Ground-up rotisserie prepped build.
This 1966 was originally sold in Oregon.
I purchased it from the second owner last year in Eastern Oregon.
I bought the car with the paint and bodywork completed.
It had not been driven since the restoration began about two years ago.
I built the engine, installed the new transmission, parts of the interior, rear end, ignition, heating, cooling, and fuel systems.
I have driven it a few times to ensure everything functions properly.
I did the best I could to list everything, but I may have missed a few things.
I will happily answer any questions, take or send additional pictures or videos upon request.
Not desperate to sell.
I just looking to move on to the next project ? $43,500 No trades at this time.
Clear Oregon title in hand.
All parts listed are brand new except for the engine block, headers, and transmission case (some internals) or otherwise noted.
ENGINE:
SBC 383 1998 Vortec 4 bolt engine block.
030 over.
Speed Pro flat-top pistons.
10.
4:
1 Compression Ratio Total Seal Piston Rings Scat 9000 series crank.
ARP Main Bolts Scat Pro Stock I Beam Connecting Rods 5.
7 length.
Fully balanced assembly Brodix IK180 cylinder heads.
64cc, Hydraulic roller valve springs to.
575 lift.
2.
02 - 1.
60 valves.
Smith Brothers Pushrods.
Fel-Pro cylinder head
Intake gaskets ARP head bolts AFR Dual plane intake manifold - Port matched and intake and runners centered.
Howards Hydraulic small base circle roller cam and lifters Valve Lift Intake:
.
530 Exhaust:
.
515 Duration Intake:
296 Duration Exhaust:
304 Lobe center 109 Stainless 1.
5 Ratio full roller rocker arms.
Cloyes roller timing chain and gears Weiand 6Qt rear sump oil pan Melling HV oil pump with solid drive shaft.
ARP Oil pump stud Aluminum Water pump 100 Amp 1 wire Alternator Hedman Ceramic coated headers and gaskets ARP Header Bolts Energy Suspension Polyurethane engine mounts.
Transmission:
700R4 rated to 550HP New trans mount New speedometer gear assembly and cable.
Scat SFI rated flex plate PTC 2600 lockup Stall converter.
-6 AN transmission lines with heat sleeve covering B&M Pro-Ratchet Shifter Fuel system:
New fuel tank and 3/8 sending unit HP 125 electric fuel pump.
100- and 40-micron inline fuel filters.
-6 lines with AN Fittings and heat sleeve covering front to rear.
Heating and Cooling:
Champion 3-row radiator with twin 11 electric fans.
Reconditioned heater box and brass heater core, new fan motor, seals , and blower motor resistor.
Ignition:
MSD 6-AL2, MSD Pro-billet distributor and MSD Coil.
MSD 8.
5mm wires.
Rear End, Wheels, and tires Quick performance 9 inch (new housing) with billet ends.
Nodular center section 31 spline Posi, 3.
89 gears.
Drain and fill package, 11-inch drum brakes, Stainless steel flexible brake lines.
7/16 - 5x3/4 studs.
235/60-15 Mickey Thompson ET Drag Radials on 15x7 Rally wheels (New) 205/65/15 Front tires on 15x6 Rally wheels (New) Caltrac Low Pro Traction bars.
Gas shocks.
Interior:
Dynamat installed front to rear including the trunk Completely re-done.
New door panels, dash pad, headliner, package tray front and rear seats.
RJS 2 SFI rated lap belts front and rear.
Expiration date 2023 ACC Interior carpet and molded trunk carpet kits Door and trunk seals.
Autometer air-core gauges Autometer tach with shift light New front and back glass.
(Precision front windshield seal) New instrument cluster.
New Dome light and door switches Front Suspension:
Rebuilt with all new parts.
The Right Stuff front disc brake conversion with all new brake lines and manual master cylinder.
Manual Steering with idler arm bearing upgrade Exterior:
New paint New front windshield with Precision seal New AMD back window New front and rear bumpers.
New front parking lamps.
New hood lip molding New headlight molding New grille New headlight bezels New taillights and bezels.
.
1966 Nova - LESS THAN 50 MILES SINCE GROUND UP RESTORATION Ground-up rotisserie prepped build.
This 1966 was originally sold in Oregon.
I purchased it from the second owner last year in Eastern Oregon.
I bought the car with the paint and bodywork completed.
It had not been driven since the restoration began about two years ago.
I built the engine, installed the new transmission, parts of the interior, rear end, ignition, heating, cooling, and fuel systems.
I have driven it a few times to ensure everything functions properly.
I did the best I could to list everything, but I may have missed a few things.
I will happily answer any questions, take or send additional pictures or videos upon request.
Not desperate to sell.
I just looking to move on to the next project ? $43,500 No trades at this time.
Clear Oregon title in hand.
All parts listed are brand new except for the engine block, headers, and transmission case (some internals) or otherwise noted.
ENGINE:
SBC 383 1998 Vortec 4 bolt engine block.
030 over.
Speed Pro flat-top pistons.
10.
4:
1 Compression Ratio Total Seal Piston Rings Scat 9000 series crank.
ARP Main Bolts Scat Pro Stock I Beam Connecting Rods 5.
7 length.
Fully balanced assembly Brodix IK180 cylinder heads.
64cc, Hydraulic roller valve springs to.
575 lift.
2.
02 - 1.
60 valves.
Smith Brothers Pushrods.
Fel-Pro cylinder head
Intake gaskets ARP head bolts AFR Dual plane intake manifold - Port matched and intake and runners centered.
Howards Hydraulic small base circle roller cam and lifters Valve Lift Intake:
.
530 Exhaust:
.
515 Duration Intake:
296 Duration Exhaust:
304 Lobe center 109 Stainless 1.
5 Ratio full roller rocker arms.
Cloyes roller timing chain and gears Weiand 6Qt rear sump oil pan Melling HV oil pump with solid drive shaft.
ARP Oil pump stud Aluminum Water pump 100 Amp 1 wire Alternator Hedman Ceramic coated headers and gaskets ARP Header Bolts Energy Suspension Polyurethane engine mounts.
Transmission:
700R4 rated to 550HP New trans mount New speedometer gear assembly and cable.
Scat SFI rated flex plate PTC 2600 lockup Stall converter.
-6 AN transmission lines with heat sleeve covering B&M Pro-Ratchet Shifter Fuel system:
New fuel tank and 3/8 sending unit HP 125 electric fuel pump.
100- and 40-micron inline fuel filters.
-6 lines with AN Fittings and heat sleeve covering front to rear.
Heating and Cooling:
Champion 3-row radiator with twin 11 electric fans.
Reconditioned heater box and brass heater core, new fan motor, seals , and blower motor resistor.
Ignition:
MSD 6-AL2, MSD Pro-billet distributor and MSD Coil.
MSD 8.
5mm wires.
Rear End, Wheels, and tires Quick performance 9 inch (new housing) with billet ends.
Nodular center section 31 spline Posi, 3.
89 gears.
Drain and fill package, 11-inch drum brakes, Stainless steel flexible brake lines.
7/16 - 5x3/4 studs.
235/60-15 Mickey Thompson ET Drag Radials on 15x7 Rally wheels (New) 205/65/15 Front tires on 15x6 Rally wheels (New) Caltrac Low Pro Traction bars.
Gas shocks.
Interior:
Dynamat installed front to rear including the trunk Completely re-done.
New door panels, dash pad, headliner, package tray front and rear seats.
RJS 2 SFI rated lap belts front and rear.
Expiration date 2023 ACC Interior carpet and molded trunk carpet kits Door and trunk seals.
Autometer air-core gauges Autometer tach with shift light New front and back glass.
(Precision front windshield seal) New instrument cluster.
New Dome light and door switches Front Suspension:
Rebuilt with all new parts.
The Right Stuff front disc brake conversion with all new brake lines and manual master cylinder.
Manual Steering with idler arm bearing upgrade Exterior:
New paint New front windshield with Precision seal New AMD back window New front and rear bumpers.
New front parking lamps.
New hood lip molding New headlight molding New grille New headlight bezels New taillights and bezels.
.
|
|